Renesas SH7286 Technické informace

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

Chapter 5. Building the Tutorial Project The tutorial project build settings have been pre-configured in the toolchain options. To view the tool c

5.2. Connecting the debugger For this tutorial it is necessary for you to power the RSK from the supplied PSU. The E10A module will be powered via

Chapter 6. Downloading and Running the Tutorial Once the code has been built in HEW it needs to be downloaded to the RSK. Now that you are connect

• Press ‘Step In’ on the Debug Tool Bar. The code window will open ‘main.c’ and show the new position of the program counter. Support for the LC

There are several versions of the timer function depending upon the peripherals available in the device. The default function is TimerADC which we

• Press ‘Step In’ on the Debug Tool Bar. It is possible to monitor variables during debugging of the code. To set up a ‘watch’ on a variable plac

14 Chapter 7. Project Files 7.1. Standard Project Files The RSK tutorials are configured so that it is possible to provide the same tutorial code

7.1.2. Board initialisation code (hwsetup.c / hwsetup.h) There are four common stages to the configuration of the microcontroller device. The code t

16 Chapter 8. Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW manual available on the C

Renesas Starter Kit2 for SH7286 Tutorial Manual Publication Date Rev.1.00 01.Oct.2008 Published by: Renesas Techn

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit 2 for SH7286REG10J0148-0100Tutorial Manual

Renesas Starter Kit 2 for SH7286Tutorial ManualUser’s ManualRev.1.00 2008.10RENESAS SINGLE-CHIP MICROCOMPUTER

Table of Contents Chapter 1. Preface ...

Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. No one is permitted

Chapter 2. Introduction This manual is designed to answer, in tutorial form, the most common questions asked about using a Renesas Starter Kit (RS

Chapter 3. Tutorial Project Workspace The workspace includes all of the files for two build configurations. The tutorial code is common to the “De

Chapter 4. Project Workspace 4.1. Introduction HEW is an integrated development tool that allows the user to write, compile, program and debug a s

• The project name field will be pre-filled to match the workspace name above; this name may be changed. Note: HEW allows you to add multiple proj