To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C
Chapter 5. Building the Tutorial Project The tutorial project build settings have been pre-configured in the tool-chain options. To view the tool ch
5.2. Connecting the debugger For this tutorial it is not necessary to provide an external power supply to the board. The power will be obtained from
14. Select FF000 for the Firmware location for the program. It is recommended that the E8a firmware location is towards the top of the memory map. 1
22. The Flash Memory write program is downloaded. 23. The Output window in HEW will state ‘Connected’. Now is a good time to save the HEW session.
Chapter 6.Downloading and Running the Tutorial Once the code has been built in HEW it needs to be downloaded to the RSK. There will now be an additio
column to the left of the breakpoint column. Up to 8 eventpoints can be set. Eventpoints do not require programming the flash memory, and thus are fa
33. Right click on the ‘FlashLEDs()’; function and select ‘Go to cursor’. The code will execute to the selected line and stop. An automatic breakpo
42. Press <Stop> on the debug tool bar. 43. Press ‘CTRL-B’ to open the breakpoint window. 44. Select ‘Remove All’ 45. Press <OK>.
replacement string. 54. Remove the breakpoint 55. Right click on the ‘DisplayString();’ function call after the loop and select ‘Go to cursor’. Th
Chapter 7. Project Files 7.1. Standard Project Files The RSK tutorials are configured so that it is possible to provide the same tutorial code on m
Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang
The call to ‘hardwaresetup()’ will initialise the device hardware and peripherals ready for the tutorial software. The call to ‘main()’ will start th
7.1.3. Main tutorial code (Main.c / main.h) The main tutorial code is common to all tutorial projects. The display initialisation and string display
Chapter 8. Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW manual available on the CD or
Renesas Starter Kit RSKM16C6NK Tutorial Manual Publication Date Rev.04.00 30.OCT.2007 Renesas Technology Europe Ltd.Publ
1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit for M16C/6NKREG10J0018-0400Tutorial Manual
Renesas Starter KitRSKM16C6NK Tutorial ManualUser’s ManualRev.4.00 2007.10RENESAS SINGLE-CHIP MICROCOMPUTER
Table of Contents Chapter 1. Preface...
Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of this d
Chapter 2. Introduction This manual is designed to answer, in tutorial form, the most common questions asked about using a Renesas Starter Kit (RSK)
Chapter 3. Tutorial Project Workspace The workspace includes all of the files for two build configurations. The tutorial code is common to both the
Chapter 4. Project Workspace 4.1. Introduction HEW is an integrated development tool that allows the user to write, compile, program and debug a sof
of many code examples for the peripheral modules of the device. The final option is for an application build where the debugger is configured but the
Komentáře k této Příručce