Renesas H8/3627 Series Uživatelský manuál stáhnout pdf (Strana 12)

2.2.4 Fastening Cable Head

UTIONCA

1. Use a Phillips-type screwdriver whose head matches

the screw head.

2. The tightening torque must be 0.13 N•m or less.

If the applied torque cannot be accurately measured,

stop tightening when the force required to turn the screw

becomes significantly greater than that needed when first

tightening. If a screw is tightened too much, the screw

head may break or an IC socket contact error may be caused

by a crack in the IC socket solder.

3. If the emulator does not operate correctly, cracks might

have occurred in the solder. Check conduction with

a tester and re-solder the IC socket if necessary.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Žádné komentáře

Renesas H8/3627 Series Uživatelský manuál Strana 12