47
43
PC Card Type Flash Programmer
USB flash programmer
IC Socket Type Programming Board
Flash Programmer
The PC card type flash programmer for the M16C is a compact flash
programmer based on PCMCIA standards for PC card interfaces. This
product can download a programming file to a PC in a moment. (Other
products have to spend a few minutes when downloading a programming file
of 256KB size.) This flash programmer is available in three types of products:
Serial I/O mode, CAN, and M3BUS.
(Products that support Serial I/O mode)*
)
[Features]
• Capable of writing at high speed using Serial I/O mode
256K bytes written in about 15 seconds
256K bytes erased in about 1 second
[Ordering information]
M3A-0655G01
Support are M16C/10, 62A, 62M, 62N, 6N, 62P, 80, M32C/80
M3A-0655G02
Support are M16C/10, 20, 62A, 62M, 62N, 6N, 62P, 80, M32C/80
Support OS : Windows 98, Windows 98SE, Windows ME
(Products that support CAN)*
)
[Features]
• Capable of writing using CAN input output
• Can write to microcontrollers on CAN network
• System-dependent transfer speed can be set
[Ordering information]
M3A-0677S
M16C/6N,M16C/1N (under development)
The IC socket type programming board is designed to write and erase the
internal flash memory of the MCU as a single unit using Serial I/O mode.
When used in combination with a PC card type flash programmer, this board
allows you to erase and write to the internal flash memory at high speed.
[Features]
• Operates with single 5 V power supply
• Switchable between 5 V/3.3 V version MCUs
[Ordering information]
M3A-0656G01 : 0.65mm-pitch 100-pin version
G02 : 0.5mm-pitch 100-pin version
G03 : 0.65mm-pitch 80-pin version
G04 : 0.5mm-pitch 144-pin version
M3A-0251G01 : 0.65mm-pitch 52-pin DIP-version
G02 : 0.65mm-pitch 56-pin version
M3A-0106G01 : 0.5mm-pitch 48-pin version
G02 : 0.8mm-pitch 32-pin version
(under development)
Please consult Renesas for details of other packages.
* using only M3A-0655G01/G02
(Products that support M3BUS (based on IE_Bus)
This product is not mass-produced.
[Features]
• Capable of writing using M3BUS
Communication speed mode 1 (about 17 KB/second) only is
supported
The USB flash programmer is a USB1.1-compliant compact flash programmer. The
necessary files are written from a PC into the target MCU via a USB interface at high
speed. The supported MCU types will be added by upgrading the GUI version in the future.
[Features]
• Can be programmed at high speed by using USB input/output.
• 256 Kbytes can be programmed in about 25 s, and can be erased in about 1 s.
• A 5 V power supply can be fed to the MCU via USB.
[Ordering type name]
M3A-0665
[Supported MCUs]
M16C/10, 24, 26, 62A, 62M, 62N, 6N, 62P and 80 and M32C/80
[Supported OSs]
Windows 98, Windows 98 SE, Windows Me, Windows 2000, Windows NT and Windows XP
* Windows2000, WindowsXP are under development.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce