Renesas H8S/2128 Series Technické informace

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

iPrefaceThank you for purchasing this user system interface cable (HS2128ECN61H) for the Hitachi’soriginal microcomputer H8S/2128 series.The HS2128ECN

iiContentsSection 1 Configuration... 1Section 2 C

1Section 1 ConfigurationCAUTIONUse an IC149-080-058-B51 socket (manufactured byYAMAICHI ELECTRONICS Co., Ltd.) for the TFP-80Cpackage IC socket on

2Table 1 lists the HS2128ECN61H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS2128ECN61H ComponentsNo. Compon

3Section 2 Connection Procedures2.1 Connecting User System Interface Cable to Emulator StationAlways switch OFF the user system and the emulatorprod

4Figure 2 Connecting User System Interface Cable to Emulator Station2.2 Connecting User System Interface Cable to User SystemAlways switch OFF the u

52.2.2 Soldering IC SocketAfter fastening, solder the IC socket for an TFP-80C package to the user system. Be sure tocompletely solder the leads so t

6Fasten the user system interface cable head to the IC socket for an TFP-80C package on the usersystem with the four screws (M2.6 x 12 mm; with four f

72.2.5 Fastening Cable Body1. Open the cable holder at the cable head.2. Placing the cable body so it fits inside the cable holder, connect the cable

82.3 Recommended Dimensions for User System Mount PadFigure 5 shows the recommended dimensions for the mount pad (footprint) for the user systemwith a

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

92.4 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 6.Figure 6 Dimension

102.5 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head

11Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a Phillips-type screwdriver whose hea

12Figure 8 Installing MCU to User System

13Section 4 Verifying Operation1. When using the E6000 emulator (HS2148EPI60H) for the H8S/2148, H8S/2138, H8S/2128series, turn on the emulator acco

14Section 5 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h

Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.The semiconductor operati

H8S/2128 Series TQFP-80C User System Interface Cable (HS2128ECN61H) for E6000 EmulatorUser’s ManualUser’s ManualRev.1.0 1999.01

Cautions1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’spatent, copyright, trademark, or other intellec

IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for f

IILIMITED WARRANTY Hitachi warrants its user system interface cables to be manufacturedin accordance with published specifications and free from d

IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref