Renesas H8S/2338 Series Uživatelský manuál Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
Simulator for H8/300, H8/300H and H8S 11 Specific SYStem Commands
©1989-2014 Lauterbach GmbH
SYStem.Option Advanced Advanced addressing mode
Defines the address mode of the CPU.
SYStem.Option EXR EXR mode setting
TBD
SYStem.Option IMASKASM Disable interrupts while single stepping
Default: OFF.
If enabled, the interrupt mask bits of the CPU will be set during assembler single-step operations. The
interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are
restored to the value before the step.
Format: SYStem.Option Advanced [off | on]
off Normal address mode (64K).
on Advanced address mode (16M).
Format: SYStem.Option EXR [ON | OFF]
Format: SYStem.Option IMASKASM [ON | OFF]
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Komentáře k této Příručce

Žádné komentáře