Renesas Emulation Pod M306H2T-RPD-E Technické informace Strana 26

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 68
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 25
M306H5T3-RPD-E User’s Manual 2. Setup
REJ10J0866-0100Z Rev.1.00 Dec.16, 2004
Page 24 of 66
2.3.4 Replacing Oscillator Circuit Boards
Figure 2.5 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit board, see Figure 2.2.
Unscrew the screw securing the oscillator circuit board.
Lift off the oscillator circuit board.
Insert the J1 connector of a new oscillator circuit board
to the connector of the main board.
Secure the new oscillator circuit board with the screw.
Figure 2.5 Replacing oscillator circuit boards
CAUTION
Note on Replacing the Oscillator Circuit Board:
Always shut OFF power when removing the upper cover or replacing oscillator circuit board. Otherwise,
internal circuits may be damaged.
Zobrazit stránku 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Komentáře k této Příručce

Žádné komentáře