Renesas SuperH SH7280 Series Uživatelský manuál Strana 7

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 120
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 6
2. Specifications
2.1. Specifications
Operating
Environment
Ambient temperature : 0°C to 40°C Humidity: below 80% (non-condensing)
Storage
Environment
Ambient temperature: -10°C to +40°C Humidity: below 80% (non-condensing)
Operating voltage 3.3V plus/minus 5% or 5V plus/minus 5%
Electricity
consumption
Power saving mode Max. 40mA (Stand-alone, operating voltage at 3.3V)
Max. 50mA (Stand-alone, operating voltage at 5.0V)
Normal mode Max. 90mA Average 70mA (Stand-alone, operating voltage at 3.3V)
Max. 120mA Average 90mA (Stand-alone, operating voltage at 5.0V)
Dimensions Approx. 48(W) x 74(H) x 14(D)mm (Excluding connector projection part)
Weight Approx. 50g
CE mark obtained(EMI:EN55011 Group1 ClassA ,EMS:EN61000-6-2)
International
standards
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
2.2. Function Specifications
Programmable
MCU
Renesas Electronics built-in Flash Memory Microcomputer
Operation Mode
Clock-synchronous serial I/O
Single wire Clock-asynchronous serial I/O
Clock-asynchronous serial I/O
Programming
mode
Serial Programming
Data Mode
Following data mode can be selected:
-Single Data Mode: One program data can be set.
-Multi Data Mode: One to four program data can be set.
Channel Mode
Following channel mode can be selected:
-Single CH Mode: Only one S550-SFWv3 can be used for programming.
-Multi CH Mode: Maximum of ten S550-SFWv3 can be used for programming.
* One channel means one S550-SFWv3.
* "Multi Data Mode" and "Multi CH Mode" cannot be set at the same time.
FA Mode
The FA equipment can control remotely by controlling I/O of the S550-SFWv3.
* For details, see the [S550-SFWv3 FA Mode Operation Manual].
2.3. System Requirements
Host Machine IBM PC/AT Compatible machine
CPU Pentium200MHz or higher
Memory 64Mbyte or higher
HDD Minimum of 10Mbyte available disk space
CRT 800 x 600 dots or better, minimum of 16 bits (24 bits or more recommended)
Others
CD-ROM drive x 1
USB 2.0 compliant USB port x 1 to 10 (It is possible to substitute with self-powered USB
hub.)
OS Microsoft Windows 7(32bit/64bit), Vista, XP, 2000
Serial Flash Programmer[S550-SFWv3] Operation Manual 6
Zobrazit stránku 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 119 120

Komentáře k této Příručce

Žádné komentáře